Filter
ID :  till 
Mnemonic code:
Code in external DB source:
Name:
Tags:
Sorting:  till 
Preview text:
Detailed description:
Activity Start Date: Select date in calendarSelect date in calendar
Activity End Date: Select date in calendarSelect date in calendar
Number of shows:  till 
Information Block type:
Information Block ID:
Information Block mnemonic code:
Information Block name:
Information Block code in external DB source:
Create date: Select date in calendarSelect date in calendar
Описание:
Теги:
Автор:
Рубрика:
  

Journal

The article describes the main problems associated with ineffective sealing of rotary kilns and the resulting negative impact on the energy balance of...
Issue №6, 2015
Section: Equipment and technology
Keywords: kiln seal, graphite blocks, fuel saving, energy saving, seal`s efficiency
Autor: O. Sanochkin.
The paper informs of the technical solutions by Bedeschi (Italy) for storage and removal of bulk raw materials from the stacks in cement produ...
Issue №6, 2015
Section: Equipment and technology
Keywords: stacker, reclaimer, bulk materials handling, storage, blending, homogenization
Autor: G. Bottacin.
In cement lines, significant masses of NOx can be formed both in the rotary kilns and the precalciners. To reduce NOx formation, kiln burners applying...
Issue №6, 2015
Section: Ecology and safety
Keywords: NOx, low NOx combustion burners, low NOx combustion systems for precalciners, selective non-catalytic reduction system (SCNR)
Autor: L. Ricci.
This paper explains the basic concepts, history of studies and the results of the Life Cycle Assessment (LCA) of the Czech Cement and Environm...
Issue №6, 2015
Section: Ecology and safety
Keywords: Czech cement, environmental product declaration, life cycle assessment, product category rules
Autor: S. Rollova.
The properties of expansion additive synthesized by calcining kaolin from Zhuravliny Log deposit, limestone and natural gypsum mixed to an optimal rat...
Issue №6, 2015
Section: Science and production
Keywords: kaolin, expansion admixture, Portland cement
Autor: I.N. Medvedeva, S.A. Krasnobayeva, M.E. Voronkov, A.S. Brykov, Z.V. Stafeeva.
The paper describes masonry salt efflorescence, occurring in the mortar joints, on bricks, concrete blocks, natural or artificial stone as a result of...
Issue №6, 2015
Section: Science and production
Keywords: efflorescence, mortar, concrete, soluble salt
Autor: M.P. Schuller.
In 2015 8,478.9 kt of cement and 5,862.2 kt of clinker were produced, or, respectively 0.1% and 0.8% less than in 2014. Per capita cement prod...
Issue №6, 2015
Section: Ukrainian pages
Keywords: cement and clinker production in Ukraine, cement consumption in regions of Ukraine
As the most widely used building material in the world, concrete is unequaled for its versatility and utility in modern construction. However, numerou...
Issue №6, 2015
Section: Concrete
Keywords: concrete, petrography, the stereomicroscope, the petrographic microscope, the scanning electron microscope
Autor: D. Rothstein.
The optimum (for the maximum compressive strength and minimal consumption of cement) ratio of the components, mineral and chemical additives w...
Issue №6, 2015
Section: Concrete
Keywords: superplasticizer C-3, mineralpowder, silicafume, non-autoclavedaerated concrete
Autor: V.V. Belov, Rushdie Ahmed Ali.
In 2005, Czech Skanska in collaboration with MC-Bauchemie started developing rapid-hardening concrete for the fastest possible replacement of the exis...
Issue №6, 2015
Section: Concrete
Keywords: airport, speed of repair, concrete roads, "fast-setting concretes", repairs of cement concrete pavements
Autor: J. Srutka, M. Sapik.

1, ... 85, 86, 87, 88, 89, ... 221
The use of materials published on the site is allowed only with reference to the source (the journal «Cement and its application») and a hyperlink to the quoted material.
© 2007-2024 PetroCem Ltd
Privacy policy