Journal
Alkali-activated concrete (AAC) is a sustainable concrete system using alkali-activating aluminosilicate precursors (e. g., fly ash (FA), slag). A...
| Issue №6, 2025 |
| Section: Concrete |
| Keywords: alkali-activated concrete, fly ash, ground granulated blast furnace slag, GGBFS, curing regime, compressive strength, mercury intrusion porosimetry |
| Autor: Amit Trivedi, Rajeev Goel, Rakesh Kumar, Rohit Kumar, Brijesh Singh. |
The design, engineering and technological docu-mentation is developed and a complex of equipment is manufactured for the process line of autoclaved ae...
| Issue №3, 2022 |
| Section: Equipment and technology |
| Keywords: innovative material, increased strength, thermal-insulating properties, cutting of solid monolith, autoclave curing, gas concrete, automation, geometry fidelity, process line, equipment |
| Autor: A.Y. Panychev, A.V. Benin, V.Y. Solovieva, V.A. Chernakov, A.V. Khitrov. |
The aim of the research was to study the influence of high calcium ash (HCA) of thermal power plants of different composition and properties o...
| Issue №3, 2022 |
| Section: Application of cement |
| Keywords: cement-ash stone deformations, autoclave curing, steam curing, three-parameter models, correlation factors |
| Autor: G.I. Ovcharenko, E.Y. Khizhinkova. |
In the worldwide practice of precast concrete industry, there is a trend to reduce the temperature of isothermal heating during concrete steam curing,...
| Issue №1, 2012 |
| Section: Concrete |
| Keywords: Portland cement, granulometric composition, precast concrete, curing, soaking time |
| Autor: O.M. Smirnova. |
The kinetics of modified cement pastes’ hardening was examined with five different samples of Portland cement in the conditions of moist heat curing a...
| Issue №4, 2011 |
| Section: Concrete |
| Keywords: curing kinetics, Portland cement, mineral additives, moist heat curing, strength after 24 hours, cement stone with modifying additives |
| Autor: L.M. Dobshits, O.V. Kononova, S.N. Anisimov. |