Journal
As of January 1, 2015 a new revised standard GOST 22266-2013 "Sulfate Resistant Cements. Specifications" was introduced. The paper discusses...
Issue №1, 2015 |
Section: Standartization and quality |
Keywords: sulphate resistant cement, standard |
Autor: S.P. Sivkov. |
The paper offers an advanced scientific and practical understanding of the sulfate corrosion affecting Portland cement concretes and examines its most...
Issue №6, 2014 |
Section: Concrete |
Keywords: sulphate attack, Portland cement concrete, ettringite, thaumasite, gypsum |
Autor: A.S. Brykov. |
The ability of aluminium compounds (amorphous Al(OH)3, aluminium sulphate and basic aluminium sulphate) to inhibit destructive alkali-...
Issue №1, 2014 |
Section: Science and production |
Keywords: aluminum hydroxide, aluminum sulphate, basic aluminum sulphate, alkali-silica reaction, mitigation, Portland cement, concrete, water-reducing admixtures, superplasticizers |
Autor: A.S. Brykov, A.V. Anisimova, N.S. Rozenkova. |
One of the most popular preventive measures to minimize the occurrence of chemical expansive reactions, namely the internal sulphate reaction (ISR...
Issue №2, 2014 |
Section: Concrete |
Keywords: internal sulphate reaction, delayed ettringite formation, limestone filler, mineral additions, microstructure |
Autor: A. Santos Silva, D. Soares, L. Matos, M. Salta, A. Gonçalves, A. Bettencourt Ribeiro, A. Pavoine, L. Divet. |
Samples were taken from zones of the shotcrete lining in a tunnel where the shotcrete had completely lost its strength and could easily be removed by ...
Issue №2, 2014 |
Section: Concrete |
Keywords: shotcrete, tunnel, thaumasite, water glass, sulphate |
Autor: J. Tritthart, D. Klammer, F. Mittermayr, A. Brunnsteiner. |
The influence of plasticizers of different chemical nature on the processes of structure formation of alkali Portland cement in the system "Portl...
Issue №3, 2014 |
Section: Dry construction mixes |
Keywords: alkaline cements, sodium metasilicate, calcium sulphate hemihydrate, gypsum, structure formation, plasticizers, plastic strength, induction period |
Autor: R.F. Runova, I.I. Rudenko, A.P. Konstantinovsky. |