Journal
The results of studies of binding properties of mechanically activated compositions based on Portland cement (PC) and mineral additives are pr...
| Issue №1, 2017 |
| Section: Science and production |
| Keywords: blended cements, mineral additives, mechanical activation |
| Autor: A.M. Kalinkin, B.I. Gurevich, E.V. Kalinkina, V.V. Tyukavkina. |
The aim of the article is to analyze the way of decreasing specific energy consumption in cement production on the trritory of Ukraine.
| Issue №5, 2007 |
| Section: Science and production |
| Keywords: energy saving, fuel consumption, national regulations, mineral additive |
| Autor: A.D. Gavryushin, A.I. Zdorov, M.Sh. Fayner, S.I. Darchuk, V.S. Melentieva. |
The article gives the results of the commercial tests on the production of mechanically and chemically activated cements of low water demand at a high...
| Issue №3, 2008 |
| Section: Science and production |
| Keywords: mechanochemical activation, mineral additives, manufacture |
| Autor: M.Ya. Bikbau, V.N. Mochalov, Chen Lun. |
The influence of mineral additives – waste ash and slag from Verkhnetagilskaya TPP and granulated blast furnace slag from OAO Nizhny Tagil Metallurgic...
| Issue №5, 2011 |
| Section: Waste utilization |
| Keywords: waste ash and slag, mineral additive, concrete |
| Autor: F.L Kapustin, D.V. Ragozin, A.V. Kuznetsov, V.A. Klevakin, I.S. Semerikov, A.F. Kapustin. |
The microstructure of hydration products of composite cement containing as mineral additives granulated blast-furnace slag (10%), flask &#...
| Issue №5, 2010 |
| Section: Science and production |
| Keywords: composite cement; mineral additives; hydration products; mycrostructure |
| Autor: L.D. Shakhova, D.E. Kucherov. |
The results of research on optimization of the composition of sulfomineral additives and their influence on the formation of composition, structure an...
| Issue №5, 2010 |
| Section: Science and production |
| Keywords: autoclave aerated concrete; sulfomineral additives; chemical reinforcing; lowbasicity hydrosilicates of calcium. |
| Autor: A.A. Mechai, E.I. Baranovskaya. |
The article discusses the basic types of ultradisperse silica produced by the industry, their functions within cement grouts and concretes, and also t...
| Issue №2, 2009 |
| Section: New materials |
| Keywords: mineral additive, concrete, microsilica, set strength |
| Autor: A.S. Brykov, R.T. Kamaliev. |
Metakaolin is an artificial pozzolana obtained by calcining kaolinite-type clays. Metakaolin can replace a part of Portland cement in the concrete wit...
| Issue №4, 2012 |
| Section: Concrete |
| Keywords: mineral additives, concrete, durability |
| Autor: A.S. Brykov. |
The kinetics of modified cement pastes’ hardening was examined with five different samples of Portland cement in the conditions of moist heat curing a...
| Issue №4, 2011 |
| Section: Concrete |
| Keywords: curing kinetics, Portland cement, mineral additives, moist heat curing, strength after 24 hours, cement stone with modifying additives |
| Autor: L.M. Dobshits, O.V. Kononova, S.N. Anisimov. |
Hydraulically active haydite dust is a large-tonnage waste of the construction materials industry. It is shown that haydite dust from different compan...
| Issue №1, 2013 |
| Section: Waste utilization |
| Keywords: mineral additive, claydite dust, hydraulic activity, composite gypsum binders |
| Autor: R.Z. Rakhimov, M.I. Khaliullin, A.R. Gaifullin. |