Journal
A comparative characteristic of fly ash formed during the combustion of raw materials of plant origin (peat, bark, sawdust, sewage sludge from the...
| Issue №2 |
| Section: Waste utilization |
| Keywords: ash utilization, ash and slag waste, hearth ash, fly ash, mineral additives, chemical composition, greening of the economy, cement |
| Autor: A.B. Diagileva, A.I. Smirnova. |
The purpose of the study is to develop cement fine-grained concrete modified with active mineral additives for 3D concrete printing (3DCP) wit...
| Issue №1 |
| Section: Science and production |
| Keywords: concrete, additive manufacturing in construction, 3DCP, active mineral additives, rheotechnological properties, strength. |
| Autor: R.Kh. Mukhametrakhimov. |
The examined fine mineral additives introduced into Portland cement increase the strength of cement both during its hardening in standard conditions a...
| Issue №3, 2022 |
| Section: Science and production |
| Keywords: Portland cement, strength, finely dispersed mineral additive, diopside, limestone, combined additive |
| Autor: L.V. Ilyina, N.O. Gichko, A.K. Tulyaganov. |
In order to reduce the carbon factor a lot of mineral additives are used in cements, which often leads to a sharp fall in its strength. Active (gr...
| Issue №2, 2022 |
| Section: Waste utilization |
| Keywords: crystallized steel slag, mineral additives, carbon factor, strength of cements |
| Autor: S.P. Sivkov, E.V. Turusheva, S.V. Moshkovskaya, A.P. Krylov. |
The emerging global trend of making the construction industry "greener" is posing new challenges to manufacturers of building materials, as ...
| Issue №6, 2021 |
| Section: Ecology and safety |
| Keywords: cement, mineral additive, СО2 emissions reduction |
| Autor: T.N. Morozova, S.V. Moshkovskaya, P.A. Parfenov, Ye.A. Khusainova. |
Wall materials of stable quality are required for the construction of facilities in the Arctic zone of Russia. Portland cement-based foam concretes pr...
| Issue №2, 2020 |
| Section: Concrete |
| Keywords: foam concrete, Portland cement clinker, active mineral additives, cement with mineral additives, quartz-feldspar sand, zeolite, foam concrete mixture, monodisperse pore distribution, density, strength, freeze-thaw resistance, thermal conductivity |
| Autor: A.Y. Mestnikov, A.I. Kudyakov, V.N. Rozhin. |
The article discusses the current state of cement production in Georgia. Because of the scarcity and high cost of mineral additives, the companies beg...
| Issue №3, 2018 |
| Section: Science and production |
| Keywords: cement production, mineral additive, pumice, crushed stone, tuff, basalt |
| Autor: R. Skhvitaridze, E. Shapakidze, I. Gejadze, T. Kordzakhia, G. Tsintskaladze, I. Giorgadze, Sh. Verulava. |
The effect of mineral additives of various composition and dispersive capacity (kaolin, metakaolin, microsilica, microcalcite, wollastonite) o...
| Issue №3, 2017 |
| Section: Science and production |
| Keywords: concrete freeze-thaw resistance, air entrainment, air- entraining admixture, active mineral additives, active centres. |
| Autor: Yu.M. Kudla, A.S. Brykov, S.V. Myakin, E.A. Mikhailova. |
The results of studies of binding properties of mechanically activated compositions based on Portland cement (PC) and mineral additives are pr...
| Issue №1, 2017 |
| Section: Science and production |
| Keywords: blended cements, mineral additives, mechanical activation |
| Autor: A.M. Kalinkin, B.I. Gurevich, E.V. Kalinkina, V.V. Tyukavkina. |
The aim of the article is to analyze the way of decreasing specific energy consumption in cement production on the trritory of Ukraine.
| Issue №5, 2007 |
| Section: Science and production |
| Keywords: energy saving, fuel consumption, national regulations, mineral additive |
| Autor: A.D. Gavryushin, A.I. Zdorov, M.Sh. Fayner, S.I. Darchuk, V.S. Melentieva. |